How to Set Up a Docker Swarm Cluster on Raspberry Pi 4 for Edge Computing in 2026 👋
Learn how to build your own Raspberry Pi 4 Docker Swarm cluster at home or in your garage lab. In 2026, lightweight edge computing is huge—this guide gives you a clear, step-by-step setup with no-nonsense tips and personal hacks. Expect zero-fluff, high-impact instructions that rank fast and keep your Pi nodes humming.
---
📌 Table of Contents
1. What Is a Docker Swarm Cluster on Raspberry Pi 4? 🧠
2. Why Use Docker Swarm on Raspberry Pi 4?
3. Step-by-Step Guide to Setting Up Docker Swarm on Raspberry Pi 4
1) Prepare Your Raspberry Pi 4 Nodes
2) Install Docker Engine
3) Initialize the Swarm Manager
4) Add Worker Nodes to the Swarm
5) Deploy a Test Service
4. Comparing Kubernetes vs. Docker Swarm on Raspberry Pi 4
5. My Garage-Lab Story: Pi Swarm Lessons Learned
6. Frequently Asked Questions (FAQ)
7. Why This Matters in 2026 🌙
8. What You Can Take Away 📝
9. Sources & Further Reading
---
What Is a Docker Swarm Cluster on Raspberry Pi 4? 🧠
A Docker Swarm cluster on Raspberry Pi 4 is a group of Pi 4 devices networked together to orchestrate containerized applications. You get built-in load balancing, service discovery, and fault tolerance—just like in a full-scale data center, but at a fraction of the cost and energy.
It turns your Raspberry Pi 4 home lab into an edge computing node.
---
Why Use Docker Swarm on Raspberry Pi 4?
- Cost-effective: Pi 4 boards cost under \$60 each.
- Low power: ~5 W per node—ideal for 24/7 edge workloads.
- Easy clustering: Swarm mode is simpler than full Kubernetes.
- Scalable: Add or remove nodes in seconds.
Real talk: I started with two Pi 4s on my dining table; now I run CI pipelines and home automation services—no cloud bill ever!
---
Step-by-Step Guide to Setting Up Docker Swarm on Raspberry Pi 4
> Note: All Pi 4 nodes should run Raspberry Pi OS Lite (64-bit) updated to the latest patches.
1) Prepare Your Raspberry Pi 4 Nodes
- Flash Raspberry Pi OS Lite 64-bit to each microSD card (use BalenaEtcher).
- Boot Pi with Ethernet connected—static IP is best (assign via router).
- SSH into each node:
ssh pi@192.168.1.101
- Change default password; enable apt UTF-8 locales:
sudo raspi-config → Localisation Options → UTF-8
Sometimes I forget locale—services choke on weird characters. So double-check.
2) Install Docker Engine
On every Pi 4 node:
1. Update packages:
sudo apt update && sudo apt upgrade -y
2. Install Docker prerequisites:
sudo apt install -y \
apt-transport-https \
ca-certificates \
curl \
gnupg \
lsb-release
3. Add Docker’s official GPG key and repository:
curl -fsSL https://download.docker.com/linux/debian/gpg | sudo gpg --dearmor -o /usr/share/keyrings/docker-archive-keyring.gpg
echo \
"deb [arch=arm64 signed-by=/usr/share/keyrings/docker-archive-keyring.gpg] https://download.docker.com/linux/debian \
$(lsb_release -cs) stable" | sudo tee /etc/apt/sources.list.d/docker.list > /dev/null
4. Install Docker Engine:
sudo apt update
sudo apt install -y docker-ce docker-ce-cli containerd.io
5. Add ‘pi’ user to the docker group (no sudo for docker commands):
sudo usermod -aG docker pi
Log out and back in, or reboot. Then test:
docker run hello-world
You should see “Hello from Docker!” in the console. If not—troubleshoot network or GPG keys.
3) Initialize the Swarm Manager
On your designated manager node (e.g., 192.168.1.101):
- Initialize swarm mode:
docker swarm init --advertise-addr 192.168.1.101
You’ll get a docker swarm join command with a token. Save it.
> Side note: use --listen-addr if you have multiple interfaces.
4) Add Worker Nodes to the Swarm
On each worker Pi (e.g., 192.168.1.102, 103):
- Execute the join command you saved:
docker swarm join --token SWMTKN-1-xxxxxxxx 192.168.1.101:2377
Then back on manager:
- Verify nodes:
docker node ls
You’ll see manager and worker roles listed.
5) Deploy a Test Service
On the manager node:
1. Create an overlay network:
docker network create --driver overlay pi-swarm-net
2. Deploy an Nginx service with 3 replicas:
docker service create \
--name web \
--replicas 3 \
--publish 80:80 \
--network pi-swarm-net \
nginx:alpine
3. Check service status:
docker service ls
docker service ps web
Open your browser to any Pi’s IP on port 80—you’ll hit one of the Nginx containers.
---
Comparing Kubernetes vs. Docker Swarm on Raspberry Pi 4
Let’s break it down—no fancy tables, just straight talk.
Kubernetes on Pi 4
• Complexity: High—multiple control-plane components.
• Resources: >1 GB RAM per node recommended.
• Learning curve: Steep—control loops, CRDs, Helm charts.
Docker Swarm on Pi 4
• Complexity: Low—single command to init.
• Resources: Minimal—works on 1 GB RAM.
• Learning curve: Gentle—native Docker CLI.
Neither is perfect. If you need advanced networking and operators, go K8s. For quick home lab clustering, Swarm wins.
---
My Garage-Lab Story: Pi Swarm Lessons Learned
In my agency days, I pushed prototypes on cloud VMs—wasted budget.
One weekend in 2024, I cobbled three Pi 4s under my desk, soldering header pins for cluster failover lights. I thought “it won’t work”—but it did.
Here’s what went wrong:
• Forgot to swap out the default user’s password—one worker never joined.
• Used mismatched OS releases—network errors.
• Ignored heat—Pi throttled under load.
After adding a USB fan and uniform OS builds, the cluster ran Jenkins pipelines at 90% uptime. Real talk—tiny mistakes, big headaches.
---
Frequently Asked Questions (FAQ)
Q1: Can I mix Pi 3 and Pi 4 in the same Swarm?
A: You can, but Pi 3’s ARMv7 limits multi-arch images. Best to keep node types uniform.
Q2: How do I promote a worker to manager?
A: On manager:
docker node promote <NODE-ID>
Q3: What happens if the manager fails?
A: If you have one manager, Swarm is down. Add at least 3 managers for high availability.
Q4: Can I secure the Swarm with TLS certificates?
A: Docker Swarm auto-generates TLS certs. For custom CA, use --ca-cert, --key, --cert flags on init.
Q5: How do I update the Swarm OS images?
A: Drain node first:
docker node update --availability drain <NODE-ID>
then reboot and docker swam join again if needed.
---
Why This Matters in 2026 🌙
Edge computing is booming. Enterprises push machine learning inference, IoT hubs, and CDN caches onto distributed hardware.
Your Raspberry Pi 4 Swarm can run small AI models, home automation brokers (MQTT), and even light web apps locally. No cloud vendor lock-in.
Plus—learning real orchestration skills on budget hardware sets you apart in the job market.
---
What You Can Take Away 📝
- Always match Pi OS versions—same kernel avoids networking quirks.
- Keep at least 3 manager nodes for redundancy.
- Monitor temperature—use heatsinks or fans.
- Automate updates with Ansible or shell scripts.
- Backup swarm tokens and CA keys offline—critical if manager dies.
---
Sources & Further Reading
- Docker Docs: Swarm Mode Overview – https://docs.docker.com/engine/swarm/{"\n"}
- Raspberry Pi Official: Raspberry Pi OS Installation – https://www.raspberrypi.com/documentation/computers/getting-started.html{"\n"}
- Hackster.io: Raspberry Pi Docker Cluster Tutorial – https://www.hackster.io/tutorials/raspberry-pi-docker-cluster{"\n"}
- GitHub: docker-swarm-raspberrypi – https://github.com/example/docker-swarm-raspberrypi{"\n"}
- TechCrunch Edge Trends 2026 – https://techcrunch.com/2025/12/edge-computing-trends-2026{"\n"}
Related: [How to Monitor Raspberry Pi Cluster Metrics]
Building your own Docker Swarm on Raspberry Pi 4 isn’t just a hobby project—it’s real-world edge computing practice. Dive in, get hands-on, and you’ll thank yourself later.
Post a Comment